Omron SYSDRIVE 3G3MV User Manual page 331

List of Parameters
Para Reg- Name
me- ister
ter No.
No.
n108 016C Motor leak-
age induc-
tance
n109 016D Torque
compensa-
tion limit
n110 016E Motor no-
load cur-
rent
n111 016F Slip com-
pensation
gain
n112 0170 Slip com-
pensation
primary
delay time
n113 0164 Slip com-
pensation
during
regenera-
tion
n114 Not used
Description
Set the leakage inductance of the motor in use.
Note This parameter is used as a vector con-
trol constant.
Note The Inverter with the default setting in this
parameter fully functions in vector con-
trol.
Set a limit on the torque compensation function
in vector control mode.
Note Normally, the default setting does not
need to be changed.
Note The Inverter in torque compensation con-
trol limits the torque at a current 1.5 times
larger than the set value.
Used to set the no-load current of the motor in
use based on the rated motor current as 100%.
Note Used as the constant of vector control
and the slip compensation function.
Used to set the gain of the slip compensation
function.
Note The default is set to 1.0 in vector control
mode.
Note The slip compensation function is dis-
abled with n66 set to 0.0.
Used for the response speed of the slip
compensation function.
Note The default is set to 0.2 in vector control
mode.
Note The default setting does not need any
changes in normal operation.
Selects the slip compensation function in
regenerative operation.
0: Disabled
1: Enabled
Note This parameter is valid only in vector con-
trol mode.
---
Chapter 10
Set- Unit Defaul
t set-
ting of ges dur-
ting
range set-
ting
0.00 0.01 Varies No
to mH with
655.0 the
capac-
ity.
0 to 1% 150 No
250
0 to 1% Varies No
99 with
the
capac-
ity
0.0 to 0.1 0.0 Yes
2.5
0.0 to 0.1 s 2.0 No
25.5
0, 1 1 0 No
--- --- --- ---
Chan- Ref-
er-
ing ence
opera- page
tion
6-2
6-3
5-6
6-39
6-39
6-40
---
10-21