Safety Instructions - Kipor Sinemaster IG2600 Operation Manual

Appliance does not operate:
Is the output indicator light ON?
NO
YES
Is the overload
indicator light ON?
YES
Check the electrical appli-
ance or equipment for any
defects.
YES
No electricity at the DC receptacle:
Is DC circuit breaker tripped?
NO
NO
Take the generator to an
authorized dealer.
NO
Take the generator to an
authorized dealer.
Replace the electrical
appliance or equipment
Take the electrical appli-
ance or equipment to an
electrical shop for repair
YES
Push the reset button.
Take the generator to an
authorized dealer.

1. SAFETY INSTRUCTIONS

Our generators are designed to give safe anddepend-
W A R N I N G
able service if operated according to instructions.
Read and understand the Owner's Manual before op-
erating the generator. Failure to do so could result in
personal injury or equipment damage.
Exhaust gas contains poisonous carbon monoxide.
W A R N I N G
Never run the generator in an enclosed area.
Be sure to provide adequate ventilation.
When installed in ventilated protection are to be
observed.
The muffler becomes very hot during operation and
W A R N I N G
remains hot for a while after stopping the engine.
Be careful not to touch the muffler while it is hot.
Let the engine cool before storing the generator indoors.
The engine exhaust system will be heated during op-
eration and remain hot immediately after stopping the
engine.
To prevent scalding, pay attention to the warning marks
attached to the generator.