Safety Label Locations - Kipor Sinemaster IG2600 Operation Manual

a. Drain all gasoline from the fuel tank into an approved gasoline container.
b. Turn the engine switch ON, and loosen the carburetor drain screw and drain the
gasoline from the carburetor into a suitable container.
c. With the drain screw loosened remove the spark plug cap, and pull the starter grip
3 to 4 times to drain the gasoline from the fuel pump.
d. Turn the engine switch to the OFF position, and tighten the drain screw securely.
3. Change the engine oil.
4. Remove the spark plug and pour about a tablespoon of clean engine oil into the
cylinder.
Crank the engine several revolutions to distribute the oil, then reinstall the spark
plug.
5.Slowly pull the starter grip until resistance is felt. At this point, the piston is coming
up on its compression stroke and both the intake and exhaust valves are closed.
Storing the engine in this position will help to protect it from internal corrosion.
Drain Screw
Starter Grip

2. SAFETY LABEL LOCATIONS

These lables warn you of potential hazards that can cause serious injury. Read
the labels and safety notes and precautions described in this manual carefully.
If a label comes off or becomes hard to read, contact you dealer for a replace -
ment.
Oil level
Model
Safety caution
Choke lever
Engine switch
Hot caution