Application - Tx Stamp (G3/Ip/I-Fax); Tx Stamp; Printing A Tx Stamp - Konica Minolta bizhub 501 Network Operating Instructions
Network scan/fax/network fax operations
Hide thumbs
Also See for bizhub 501:
- Service manual (764 pages) ,
- Copy operations (604 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
5
5.5.17
Application - TX Stamp (G3/IP/I-FAX)
TX Stamp
When sending a document using the ADF, a TX Stamp can be printed on the original after it is scanned to
enable page-by-page checking that scanning has succeeded. When sending a double-sided original, a TX
stamp is only printed on the front page.
When [TX Stamp] is enabled, a stamp with a diameter of 4 mm is printed in pink at the position shown in the
figure.
To enable printing a stamp, the optional stamp unit is required.
The stamp ink is a consumable item. If the stamp color becomes faint, contact your service representative.
When the original is mixed, the stamp position may be displaced from the point shown in the figure.
To check that the original is successfully transmitted, refer to the transmission report or the transmission
result that appears on the setting confirmation screen.
Printing a TX stamp
%
Select [TX Stamp] on the Application screen.
5-66
Front surface of original
Original transmitting
direction
Transmitting data
Stamp
position
bizhub 501/421/361 (Version 2)
Hide quick links:
Advertisement
Table of Contents
