Checking The Recipient Status Before Sending (Manual Transmission); Manual Transmission; Faxing Manually - Konica Minolta bizhub C3850 User Manual

3.2

Checking the recipient status before sending (manual transmission)

3.2 Checking the recipient status before sending (manual transmis-
sion)

Manual transmission

Manual transmission lets the sender to check the recipient status by communicating with the recipient or
checking signal sounds to ensure that the recipient is ready to receive a fax.
Use this function to ensure faxes are sent to the receiving machines when they are ready to receive them.
Tips
Manual transmission is not available if the Confirm Address function is enabled.

Faxing manually

1
Load the original.
2
Tap [Fax].
3
Tap [Application], then configure fax option settings.
% Before scanning the original on this machine, specify the size of the original to be scanned. If you
fail to set the original size correctly, the image may be cut off. For details on how to specify the orig-
inal size, refer to page 3-12.
% For details on configuring option settings, refer to the respective columns of the following table.
Purpose
To configure basic options such as original size and resolution
To specify the method to scan the original
To adjust the image quality or density depending on the contents of the original
4
Tap [Off-Hook].
% If you are using a phone, pick up the handset.
[Fax Functions]
3
Reference
page 3-12
page 3-12
page 3-13
3-4