Table of Contents
Advertisement
CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor
and in the Viewfinder (Cont'd)
Auto White Balance Indication
(Camera mode only)
The AUTO WHITE indication and the result of the operation are dis-
played during the auto white balance adjustment operation.
X See "White Balance Adjustment" on page 51.
Menu Setting Screen
Screen used for making various settings.
The Menu Setting Screen appears when the STATUS button is
pressed for 1 second or more.
X See "Setting Menu Screens" on page 72.
TOP MENU screen (Camera mode)
Safety Zone Indication (Camera mode only)
The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and CEN-
TER MARK item on the LCD/VF[1/4] menu screen. X See page 86.
In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO FOR-
MAT[1/2] menu screen, as shown below.
SAFETY ZONE
OFF
4:3
CENTER MARK
-
OFF
ON
REC
ASPECT
DV-60I
DV-50I
4:3
DV-24P
DV-24PA
DV-25P
16:9
HDV-HD60P
HDV-HD50P
HDV-HD30P
[16:9]
HDV-HD25P
HDV-HD24P
30
Alarm Message Display
• The following alarm messages are displayed while the STA-
TUS (0, 1, 4) screen is shown in the Camera mode, or a STA-
TUS screen is shown in the VTR mode.
If an alarm is generated while the STATUS 2, 3 screen is
shown, the STATUS 0 screen returns to display the alarm.
X See page 102.
• When an abnormality occurs in the VTR, a warning message
with an error code is displayed.
X See pages 102-104.
Alarm display area
14:9
16:9
16:9+4:3
OFF
ON
OFF
ON
OFF
Cannot be selected
SAFETY ZONE
CENTER MARK
OFF
DV-60I
4:3
Cannot be selected
DV-50I
DV-24P
DV-24PA
16:9
DV-25P
HDV-HD60P
HDV-HD50P
HDV-HD30P
[16:9]
HDV-HD25P
HDV-HD24P
Switching between the LCD Screen
and Viewfinder Display
When the LCD+VF item in the LCD/VF[4/4] menu is set to
OFF, the LCD monitor and viewfinder (VF) displays are as
shown below.
LCD Monitor Status
LCD Closed
Normal LCD
Inverted LCD
LCD Open
Normal LCD
Inverted LCD
MEMO
• You can switch between the LCD monitor and the view-
finder by holding down the DISPLAY button for about 2
seconds.
• After you set up the function that switches the display
between the LCD monitor and the viewfinder by holding
down the DISPLAY button, the display mode is cancelled
by the LCD monitor open/close and normal/inverted
operations.
• If the LCD monitor is closed inside this device with the
screen in the normal display orientation, holding down
the DISPLAY button does not work.
When the LCD+VF item in the LCD/VF[4/4] menu is set to
ON, the LCD monitor and viewfinder (VF) displays are as
shown below.
LCD Monitor Status
LCD Closed
Normal LCD
Inverted LCD
LCD Open
Normal LCD
Inverted LCD
ON
MEMO
• Press the DISPLAY button for 2 seconds to switch the
LCD screen display ON and OFF.
• The viewfinder screen is always displayed.
2.35:1CE
2.35:1CH
ON
OFF
ON
DISPLAY button
LCD Display
VF Display
OFF
ON
ON
OFF
ON
OFF
ON
OFF
Inverted LCD
LCD open 40° or
more
LCD Display
VF Display
OFF
ON
ON
ON
ON
ON
ON
ON
Normal LCD
LCD close less
than 40°
31
Advertisement
Table of Contents
