Table of Contents
Advertisement
Marker and Safety Zone
Displays (Camera Mode
Only)
The marker and safety zone displays are useful in
helping you determine the angle of view for the
image according to the shooting purpose.
The marker is displayed only in the Camera mode.
Displaying the Grid Marker
1 Set [LCD/VF] B [Marker Settings] B [Grid
Marker] to "On".
(A P100 [ Grid Marker ] )
A grid that divides the screen into 3x3 is
displayed.
.
Memo :
When [Grid Marker] is set to "On", [Aspect
0
Ratio], [Aspect Marker], and [Safety Zone] do
not function.
Example of display when [Aspect Ratio] = "4:3",
0
[Aspect Marker] = "Line+Halftone", and [Center
Mark] = "On"
Safety Zone
.
Memo :
You can turn On/Off the safety zone and center
0
mark displays using [LCD/VF] B [Marker
Settings] B [Aspect Ratio], [Safety Zone], and
[Center Mark].
(A P100 [ Safety Zone ] )
124
Marker and Safety Zone Displays (Camera Mode Only)
Center Mark
Aspect Marker
Color Bar Output
Color bars can be output on this camera recorder.
Memo :
The audio test signals (1 kHz) can be output
0
simultaneously with the color bar output.
(A P106 [ Test Tone ] )
To Output the Color Bar Using the Menu
To output color bars, follow the setting procedure
below.
1 Set [Camera Function] B [Bars] to "On".
(A P90 [ Bars ] )
Color bars are output.
To Output the Color Bar Using the User Button
1 Assign the "Bars" function to any of the
user buttons.
(A P33 [Assignment of Functions to User
Buttons] )
2 Press the user button that is assigned with
"Bars".
Color bars are output.
Advertisement
Table of Contents
