To Reattach the Booklet Stapler Motor
1. Reattach the booklet stapler motor.
Important: Do not tighten the screws.
2. Attach the special tool [A] and reattach
the booklet stapler stay.
[G]: This tool is included with the stapler
spare part.
3. Turn the gear [B] with your finger until it
stops.
4. Tighten the screws to attach to the
booklet stapler motor.
5. Remove the stay again and remove the
special tool.
6. Reattach the booklet stapler stay.
7. Push the stapling unit into the machine.
SM
REPLACEMENT AND ADJUSTMENT
19
[B]
B836R914.WMF
[A]
B836