Service; Problem Solving, Operator Level Streampunch - Ricoh B234 Service Manual

6.6

SERVICE

• Should your StreamPunch require service contact your local authorized service representative.
• There are NO user-serviceable parts inside the machine. To avoid potential personal injury
and/or property damage, DO NOT REMOVE THE MACHINE'S COVER.
• It is recommended that your StreamPunch receives preventative maintenance every 6 months or
sooner depending on usage.
6.7

PROBLEM SOLVING, OPERATOR LEVEL STREAMPUNCH

Problem
No power, won't punch
Die Set will not come out using a
moderate pull
Probable Cause
Power cord not attached to back of machine or not
properly plugged into the wall
Power On/Off Switch not activated
The Die Set is in partial cycle. Turn the Die Set knob to
the HOME position. The Die Set should now slide out
easily.
Also see PAPER JAMS.
48