Differential Lock - Husqvarna Rider ProFlex 21 Operator's Manual

3. Select the required cutting height (1–7) with the
cutting height lever.
4. Push in the lock button on the lift lever and lower
down the cutting unit.

Differential lock

WARNING!
Don't rest your thumbs inside the
steering wheel. The wheel could
jerk suddenly when the differential
lock is engaged.
The differential lock can be engaged while moving
using the pedal on the left.
To avoid getting stuck you should engage it just
before you reach an obstacle.
1. Engage the differential lock when necessary by
pressing the pedal. If one of the wheels spins,
lighten the pressure on the accelerator slightly.
2. Make sure the differential lock disengages when
the pedal is released. Make small steering
movements or reverse a short distance until the
pedal returns to its normal position.
DRIVING
6007-210
6007-211
6020-013
6020-009
17
English –