•
Slow before cornering.
•
Switch off the blades when you are not mowing.
•
Take care when rounding a fixed object, so that the blades
do not hit it. Never run the machine over foreign objects.
•
Only use the machine in daylight or in other well-lit
conditions. Keep the machine at a safe distance from
holes or other irregularities in the ground. Pay attention to
other possible risks.
•
Never use the machine if you are tired, if you have
consumed alcohol, if you are taking other drugs or
medication that can affect your vision, judgement or co-
ordination.
•
Never use the machine in bad weather, for instance in fog,
in rain, damp or in wet locations,strong winds, intense
cold, risk of lightning, etc.
•
Keep an eye on the traffic when working close to a road or
when crossing it.
Cutting height
The cutting height can be adjusted to 10 different positions
with the cutting height lever. Select the required cutting height
(1-10) with the cutting height lever.
See directions in 'Setting the cutting height'.
Throttle and choke controls
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
The control is also used to activate the choke.
When the choke is engaged a richer fuel and air mixture is
fed to the engine, which facilitates starting in the cold.
OPERATING
Lifting lever for the cutting unit
The lift lever is used to set the cutting unit in transport or
mowing position.
The lever can also be used to temporarily regulate the cutting
height, e.g. for a small mound in the lawn.
1 Transport position
2 Mowing Position
Transport position
If the lever is pulled backwards the unit is raised and the
blades automatically stop rotating (transport position).
Mowing Position
If the lock button is pressed in and the lever is moved forwards
the unit will be lowered and the blades will automatically start
to rotate (mowing position).
1
2
– 15
English