Displaying Ospf Virtual Link Information; Displaying Ospf Abr And Asbr Information; Displaying Ospf Trap Status - Foundry Networks FESX Manual

Foundry Configuration Guide for the FESX, FSX, and FWSX
Syntax: show ip ospf virtual-neighbor [<num>]
The <num> parameter displays the table beginning at the specified entry number.

Displaying OSPF Virtual Link Information

To display OSPF virtual link information, enter the following command at any CLI level:
FESX424 Router> show ip ospf virtual-link
Syntax: show ip ospf virtual-link [<num>]
The <num> parameter displays the table beginning at the specified entry number.

Displaying OSPF ABR and ASBR Information

To display OSPF ABR and ASBR information, enter the following command at any CLI level:
FESX424 Router> show ip ospf border-routers
Syntax: show ip ospf border-routers [<ip-addr>]
The <ip-addr> parameter displays the ABR and ASBR entries for the specified IP address.

Displaying OSPF Trap Status

All traps are enabled by default when you enable OSPF. To disable or re-enable an OSPF trap, see "Modify OSPF
Traps Generated" on page 20-34.
To display the state of each OSPF trap, enter the following command at any CLI level:
FESX424 Router> show ip ospf trap
Interface State Change Trap:
Virtual Interface State Change Trap:
Neighbor State Change Trap:
Virtual Neighbor State Change Trap:
Interface Configuration Error Trap:
Virtual Interface Configuration Error Trap:
Interface Authentication Failure Trap:
Virtual Interface Authentication Failure Trap:
Interface Receive Bad Packet Trap:
Virtual Interface Receive Bad Packet Trap:
Interface Retransmit Packet Trap:
Virtual Interface Retransmit Packet Trap:
Originate LSA Trap:
Originate MaxAge LSA Trap:
Link State Database Overflow Trap:
Link State Database Approaching Overflow Trap:
Syntax: show ip ospf trap
20 - 48 © Foundry Networks, Inc.
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
December 2005