Chapter 21 Configuring Bgp4 - Foundry Networks FESX Manual

This chapter provides details on how to configure Border Gateway Protocol version 4 (BGP4) on Foundry
products using the CLI.
BGP4 is supported in the following configurations:
• FESX Layer 3 switches running software release 02.1.01 or later
• FSX Layer 3 switches running software release 02.2.00 or later
This chapter contains the following information:
Description
Overview of BGP4
Configuring and activating BGP4
BGP4 parameters
Memory considerations
Basic configuration tasks
Optional configuration tasks
Modifying redistribution parameters
Filtering
Configuring route flap dampening
Generating traps for BGP
Displaying BGP4 information
Updating route information and resetting a neighbor
session
Clearing traffic counters
Clearing route flap dampening statistics
December 2005
Table 21.1: Chapter Contents
© Foundry Networks, Inc.
Chapter 21
Configuring BGP4
See Page
21-2
21-6
21-7
21-9
21-10
21-21
21-37
21-40
21-58
21-64
21-65
21-100
21-106
21-106
21 - 1