Servicing Notes; License Management System (Lms) - Canon imageRUNNER 3245 Series Service Manual

IV.

Servicing Notes

A. License Management System (LMS)
Optional software features are preinstalled on all new units. To activate the
software programs, the feature must be licensed through the License
Management System (LMS) server. This replaces the need for additional
hardware or dongles to activate new software.
The LMS is a server based software license program. Each purchased
software application package contains a license access number certificate with
the documentation. The Dealer must enter the license access number and the
Color imageRUNNER serial number into the LMS server to generate a license
Key.
The LMS Server can be accessed through URL: http://www.canon.com/lms/ir/.
If there are activation or installation problems contact the Technical Support
Center. Be prepared to provide the product serial number, license access
number, and license key.
Note:
The software is preinstalled on the imageRUNNER device, only a valid
license key will enable the software feature (no additional packaged
software is available or required).
The license access number is packaged with the purchased software
option. Lost license access will not be replaced.
The imageRUNNER device serial number can be found in the "counter
check" screen.
Activated software programs will not be impacted by normal service
activity (e.g., HDD replacement).
imageRUNNER 3245/3235 Series / imageRUNNER 3230/3225 Service Guide
Rev. 1
imageRUNNER 3245/3235 Series / imageRUNNER 3230/3225 Service Guide
March 2010
Page 21