Finisher-S1; Additional Finisher Tray-B1; Finisher-Ae1; Saddle Finisher-Ae2 - Canon imageRUNNER 3245 Series Service Manual

7. Finisher-S1

• Offers one output tray as standard and a second optional output tray
• Up to 300 sheets (LTR) per tray when the optional Additional Finisher
Tray-B1 is installed
• Maximum total capacity of up to 1,000 sheets (LTR)
• Top left corner stapling for up to 50-sheets (LTR) and 30 sheets (LGL,
LTR-R, or LDGR sized sheets.
• Supports 11" x 17", LGL, LTR, LTR-R, STMT-R, Free Size, and
Envelopes
• The Inner 2 Way Tray-D1, Finisher-S1, Finisher-AE1 or Saddle
Finisher-AE2 cannot be installed at the same time.

8. Additional Finisher Tray-B1

• Option for the Finisher-S1
• Provides a second output destination within the original footprint of the
device.
• When installed, capacities for both trays are 300-sheets (LTR), 150-
sheets (All other sizes)

9. Finisher-AE1

• Offers two output trays for a total capacity of up to 2,000 sheets (LTR)
• Buffer Pass Unit-E2 is included and can act as a third output
destination.
• Corner and Double Margin stapling up to 50 sheets (LTR)
• The Inner 2 Way Tray-D1, Finisher-S1, Finisher-AE1 or Saddle
Finisher-AE2 cannot be installed at the same time.

10. Saddle Finisher-AE2

• Offers two output trays for a total capacity of up to 2,000 sheets (LTR)
• Buffer Pass Unit-E2 is included and can act as a third output
destination.
• Corner and Double Margin stapling up to 50 sheets (LTR)
• Continuous booklet printing is available (Need to turn stacking limit off
in Service Mode)
• Saddle Stitch finishing capabilities for booklet sets up to 15 sheets in
LTTR, LGL, 11" x 17" sizes
• The Inner 2 Way Tray-D1, Finisher-S1, Finisher-AE1, or Saddle
Finisher-AE2 cannot be installed at the same time.
imageRUNNER 3245/3235 Series / imageRUNNER 3230/3225 Service Guide
Rev. 1
imageRUNNER 3245/3235 Series / imageRUNNER 3230/3225 Service Guide
March 2010
Page 10