Disassembly
Removing and Replacing the Rear Housing
22
1.
Remove the battery cover, battery, and antenna, as described in the
procedures.
2.
Using tweezers, carefully remove the two screw caps from the back of the phone
near the top. Use care not to mar or damage the back housing or screw caps if
they are to be reused.
3.
Use a Torx T6 driver to remove the four housing screws. Set the screws aside
for reuse.
Screws Caps
(not shown)
Figure 7. Removing the Rear Housing
October 02, 2006
Screws
Screws
V323i/V325i
050856o
6809507A01-O