Table of Contents
Advertisement
Level 2 Service Manual
Removing and Replacing the Flip Display Lens
6809507A01-O
1.
Remove the battery cover, battery, antenna, rear housing, transceiver board,
keypad, and flip assembly as described in the procedures.
2.
Insert the flat end of the disassembly tool between the main display lens and
the flip and separate the lens from the flip (see Figure 14).
Flip Assembly
Figure 14. Removing the Flip Display Lens
3.
To replace, remove the adhesive backing from the display lens and align the
display lens to the flip assembly. Carefully press the display lens into position
on the flip assembly.
4.
Replace the flip assembly, keypad, transceiver board, rear housing, antenna,
battery, and battery cover as described in the procedures.
October 02, 2006
Lens
Disassembly
Disassembly Tool
050865o
29
Advertisement
Table of Contents
