Table of Contents
Advertisement
Level 2 Service Manual
Removing and Replacing the Antenna
G
6809507A01-O
1.
Remove the battery cover, and battery as described in the procedures.
2.
By hand, rotate the antenna base counterclockwise, as indicated by the red
arrows until loose.
3.
When the antenna threads are completely disengaged, slide the antenna out
of the housing. See Figure 6.
Antenna
Figure 6. Removing the Antenna
Ensure antenna threads are properly engaged before tightening to prevent damage
to the antenna or housing.
4.
To replace, insert the threaded end of the antenna carefully into the housing
and, after ensuring the threads are properly engaged, rotate clockwise. Tighten
firmly by hand.
5.
Replace the battery, and battery cover as described in the procedures.
October 02, 2006
Disassembly
050857a
21
Advertisement
Table of Contents
