Table of Contents
Advertisement
Level 2 Service Manual
Product Overview
Features
1. All talk and standby times are approximate and depend on network configuration, signal strength, and features selected. Standby
times are quoted as a range from DRX=2 to DRX=9. Talk times are quoted as a range from DTX off to DTX on.
6809507A01-O
Motorola V323i/V325i mobile telephones feature Code Division Multiple Access
(CDMA) technology. The mobile telephone uses a simplified icon and Graphical user
interface (GUI) for easier operation, allow Short Message Service (SMS) text
messaging, and include clock, alarm, datebook, calculator, and caller profiling
personal management tools. The V323i/V325i telephones include a built in camera.
Both phones provide 32 Embedded ring tones including VibraCall vibrating alert
and 32 Downloadable/Customizable iMelody ring tones. The V323i/V325i
telephones are dual band that allows roaming within the CDMA 800 MHz, PCS
1900 MHz, and Analog 800 MHz bands.
The V323i/V325i CDMA phones consist of a main housing assembly and a flip
assembly. The main circuit board, battery, headset jack, and accessory connector
are located in the main housing assembly. The camera on the V323i/V325i phones
is located in the hinged flip assembly.
The flip assembly contains the entire hinge mechanism. It is attached to the main
housing by four screws. The main display is on the inside of the flip assembly and
a one line LED display on the outside of the flip assembly. The main display on the
V323i/V325i phones is either a 176 x 220 65k TFT LCD . The external CLI display
is a 96 x 32 NB LCD. The camera module is a 350K pixel, VGA CMOS Sensor
Camera.
The main housing assembly includes a battery cover, chassis, main circuit board,
keypad plastic front housing, and retractable antenna.
The main circuit board contains the Receiver, Transmitter, Synthesizer and Control
Logic Circuitry which together comprise the dual band tri-mode phone electronics.
The telephones are made of polycarbonate plastic. The display and speaker, as well
as the 18-key keypad, transceiver printed-circuit board (PCB), microphone, charger
and headphone connectors, and power button are contained within the flip form-
factor housing. The 880 mAh (810 mAh for V323) Lithium Ion (Li Ion) battery
provides up to 178 minutes of talk time in CDMA mode with up to 264 hours of
1
standby time
.
V323i/V325i telephones use advanced, self-contained, sealed, custom integrated
circuits to perform the complex functions required for CDMA communication. Aside
from the space and weight advantage, microcircuits enhance basic reliability,
simplify maintenance, and provide a wide variety of operational functions.
Features available in this family of telephones include:
• Integrated VGA Camera
• Qualcomm MSM 6100 Chipset
• BREW 3.1
• Location Based Services Capable
• Multimedia Messaging Service
• Office Quality Speakerphone
• Speaker Independent Voice Dial
• Consumer Postponable Housings
October 02, 2006
Product Overview
11
Advertisement
Table of Contents
