Table of Contents
Advertisement
Disassembly
Removing and Replacing the External Display
G
G
32
1.
Remove the battery cover, battery, antenna, rear housing, transceiver board,
keypad, flip assembly, flip lens, flip cover and flip assembly shield as described
in the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Using the disassembly tool lift up the display flex connector latch and
disconnect the external display flex from the flex connector (see Figure 18)
3.
Using the disassembly tool carefully pry up the external display from main
display assembly.
Exercise extreme care when prying up the external display. Breaking the glass
display could cause injury.
Disassembly Tool
Figure 18. Removing the External Display.
4.
To replace, insert the external display flex into the display flex connector and
press the flex connector latch closed.
5.
Replace the flip assembly shield, flip cover, flip lens, flip assembly, keypad,
transceiver board, rear housing, antenna, battery, and battery cover as
described in the procedures.
October 02, 2006
External Display
V323i/V325i
Flex Connector Latch
6809507A01-O
050869o
Advertisement
Table of Contents
