Table of Contents
Advertisement
Disassembly
Removing and Replacing the Camera PC Board Assembly
36
1.
Remove the battery cover, battery, antenna, rear housing, transceiver board,
keypad, flip assembly, flip lens, flip cover, flip assembly shield, display PC
board and the vibrator/flex assembly as described in the procedures.
2.
Use the disassembly tool to lift the camera PC board from the flip housing.
Flex Connector
Disassembly Tool
Figure 23. Removing the Camera PC Board Assembly
3.
To replace, align and press the camera PC board assembly into the flip housing.
4.
Replace the vibrator/flex assembly, display PC board, flip assembly shield, flip
cover, flip lens, flip assembly, keypad, transceiver board, rear housing,
antenna, battery, and battery cover as described in the procedures.
October 02, 2006
Camera PC Board
V323i/V325i
050873o
6809507A01-O
Advertisement
Table of Contents
