Table of Contents
Advertisement
Disassembly
Removing and Replacing the Transceiver Board
G
24
1.
Remove the battery cover, battery, antenna, and rear housing as described in
the procedures.
2.
Use the disassembly tool to disconnect the flip assembly flex connector. (See
Figure 9).
Flip Flex Connector
Figure 9. Removing the Flip Assembly Flex Connector
3.
Carefully lift the transceiver PC board up and away from the phone. Avoid
damage to the flip assembly flex cable (See Figure 10).
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
October 02, 2006
V323i/V325i
Disassembly Tool
050859o
6809507A01-O
Advertisement
Table of Contents
