Pcipnp Menu; Public User Manual; Advanced Pcipnp Boot; [No] [Enabled] [Enabled] [Disabled] - Kontron 886LCD/ATX(GV) User Manual

KTD-00647-C

7.4 PCIPnP Menu

Main Advanced
Advanced PCI/PnP Settings
Warning: Setting wrong values in below sections
May cause system to malfunction.
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
PCI IDE BusMaster
Spread Spectrum Mode
TPM Clock
PCI Slot-1 IRQ Preference
PCI Slot-2 IRQ Preference
PCI Slot-6 IRQ Preference
V02.53 (C)Copyright 1985-2002, American Megatrends, Inc.
Feature
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
Spread Spectrum Mode
PCI Slot-1 IRQ Preference
PCI Slot-2 IRQ Preference
PCI Slot-6 IRQ Preference
Note: PCI Slot-3 IRQ Preference, PCI Slot-4 IRQ Preference and PCI Slot-5 IRQ Preference do not exist.
886LCD/ATX(GV) -/ATXU(GV)
Public User Manual
BIOS Setup Utility
PCIPnP Boot
[No]
[64]
[Yes]
[Enabled]
[Disabled]
[Enabled]
[Auto]
[Auto]
[Auto]
Options
No,
Yes
32, 64, 96, 128,
160, 192, 224, 248
Yes,
No
Disabled,
Enabled
Enabled,
Disabled
Enabled,
Disabled
Auto, 3, 4, 5, 7, 9,
10, 11, 12, 14, 15
Auto, 3, 4, 5, 7, 9,
10, 11, 12, 14, 15
Auto, 3, 4, 5, 7, 9,
10, 11, 12, 14, 15
Date: 2007-02-08
Security Chipset
Description
Select if you have a PnP O/S.
Value in units of PCI clocks for PCI device latency
timer register.
Assigns IRQ to PCI VGA card.
ENABLED: informs the PCI device that an ISA
graphics device is installed in the system so the card
will function correctly.
Setup PCI bus mastering for read/write to IDE drives.
Spread Spectrum Mode.
Manual IRQ selection.
Manual IRQ selection.
Manual IRQ selection.
Only available on the 886LCD/ATX(GV)
Page 60 of 71
Power Exit
NO: lets the BIOS
configure all the
devices in the
system.
YES: lets the
operating system
configure Plug and
Play (PnP) devices
not required for boot
if your system has a
Plug and Play
operating system.
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit