Wol Connector (W.o.l); Jp3 (Optional) - Kontron 886LCD/ATX(GV) User Manual

KTD-00647-C

4.21 WOL Connector (W.O.L).

Pull
Note U/D Ioh/Iol
Signal Description
Wake on LAN from an external LAN adapter is supported through this signal. Connect
PME# the W.O.L. signals from the adapter to this connector and install software to support
W.O.L.
5V/SB5V Standby 5V or ATX Power 5V depending on power state.

4.22 JP3 (optional).

Pull
Note U/D Ioh/Iol
Signal Description
Option for connection of external temperature sensor based on NTC Resistor 150mW
R-NTC
10Kohm or simialar.
886LCD/ATX(GV) -/ATXU(GV)
Public User Manual
Type Signal
PWR 5V/SB5V
PWR GND
I PME#
Type Signal
I R-NTC
I R-NTC
Date: 2007-02-08
PIN
1
2
3
PIN
1
2
Page 40 of 71