Pcipnp Menu - Kontron KTUS15/mITX User Manual

KTD-00774-D
7.4

PCIPnP Menu

Main Advanced
Advanced PCI/PnP Settings
Warning: Setting wrong values in below sections
May cause system to malfunction.
Clear NVRAM
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
OffBoard PCI/ISA IDE Card
Reserved Memory Size
V02.63+ (C)Copyright 1985-2008, American Megatrends, Inc.
Feature
Clear NVRAM
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
OffBoard PCI/ISA IDE Card
Reserved Memory Size
KTUS15/mITX
BIOS SETUP UTILITY
PCIPnP Boot Security
[No]
[No]
[64]
[Yes]
[Disabled]
[Disabled]
[Auto]
[Disabled]
Options
No
Yes
No
Yes
32, 64, 96, 128,
160, 192, 224, 248
Yes
No
Disabled
Enabled
Disabled *
Enabled
Auto
PCI Slot1
PCI Slot2
PCI Slot3
PCI Slot4
PCI Slot5
PCI Slot6
Disabled
16K
32K
64K
Chipset
Clear NVRAM during
System Boot.
<->
||
+-
F1
F10
ESC
Description
Clear NVRAM during System Boot.
No: lets the BIOS configure all the devices in the
system.
Yes: lets the operating system configure Plug and
Play (PnP) devices not required for boot if your
system has a Plug and Play operating system.
Value in units of PCI clocks for PCI device latency
timer register.
Yes: Assigns IRQ to PCI VGA card if card requests
IRQ.
No: Does not assign IRQ to PCI VGA card even if
card requests an IRQ
Enabled: informs the PCI devices that an ISA
graphics device is installed in the system so the card
will function correctly.
Enabled: Bios uses PCI busmastering for reading /
writing to IDE drivers.
Some PCI IDE cards may require this to be set to the
PCI slot number that is holding the card.
Auto: Works for most PCI IDE cards.
Size of memory block to reserve for legacy ISA
devices.
Page 71 of 82
Exit
Select Screen
Select Item
change option
General Help
Save and Exit
Exit
www.kontron.com