Replacing The 3A Fuse - PRG BAD Boy Field Service Manual

B B ™ S L
AD OY POT UMINAIRE

Replacing the 3A Fuse

The 3 Amp fuse is located on the Pan/Tilt Controller PCB.
Parts:
70.3769.0003.0 1 EA FUSE, 3AMP SLO-BLO
Tools and Supplies:
Needle-nose pliers, small
WARNING: Remove power from luminaire before performing any maintenance procedures.
To replace the 3A Fuse:
Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step 2. At Pan Yoke Leg, remove Yoke Leg Cover.
Step 3. At Pan/Tilt Controller PCB, use needle-nose pliers to carefully remove and replace 3A fuse.
CAUTION:
6 6
F S M
IELD ERVICE ANUAL
Use anti-static precautions
when working with PC boards.
Pan/Tilt Controller PCB
Figure 3-31: Removing 3A Fuse
3A Fuse
02.9812.0005