Routine Maintenance; Removing The Head Covers - PRG BAD Boy Field Service Manual

B B ™ S L
AD OY POT UMINAIRE

Routine Maintenance

Removing the Head Covers

To access some interior head components, one or both of the Head Covers may need to be removed.
Parts:
21.9812.0630
Tools and Supplies:
#2 Philips screwdriver (manual screwdriver only)
To remove Head Covers:
Step 1. At Head Cover, remove two 8-32 x 3/8" PPB screws
Step 2. Remove Head Cover from luminaire.
Aft Cover
CAUTION: DO NOT use a power screwdriver when re-installing the 8-32 x 3/" PPB screws. This
may damage the hole threads. Use a manual screwdriver only!
2 6
F S M
IELD ERVICE ANUAL
2 EA ASSY, HEAD COVER
R2 / Designer Wheel
Head Cover
Figure 3-2: Removing Head Covers
(Figure 3-2).
Front
Ring
Casting
R1 Head Cover
Hand tighten only. DO NOT use a
CAUTION: power tool on Head Cover screws.
8-32 x 3/8" PPB
Screw (2 ea)
02.9812.0005