Replacing A 2A Fuse - PRG BAD Boy Field Service Manual

Replacing a 2A Fuse

2 Amp fuses are located on the Zoom Controller PCB (4 each) and the Wheel Controller PCB (4 each).
Parts:
70.3769.0002.0 8 EA FUSE, 2AMP SLO-BLO
Tools and Supplies:
#2 Philips screwdriver
Needle-nose pliers, small
WARNING: Remove power from luminaire before performing any maintenance procedures.
To replace a 2A Fuse:
Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step 2. Remove Head Cover(s) as required. (Refer to
Step 3. At required PCB, use needle-nose pliers to carefully remove and replace 2A fuse.
0 2. 9 8 1 2. 0 0 05
M
Use anti-static precautions
CAUTION: when working with PC boards.
Figure 3-30: Removing 2A Fuse
: R
AINTENANCE EMOVE AND
"Removing the Head Covers"
2A Fuse
R P
EPLACE ROCEDURES
on page 26.)
3
65