Cleaning The Reflector - PRG BAD Boy Field Service Manual

Cleaning the Reflector

Tools and Supplies:
Micro Fiber cloth (06.6085.0001.0)
OptiMax™ Ultra Pure Cleaning Solution (06.6084.0001.0)
#2 Phillips screwdriver
To clean reflector:
CAUTION: Use ONLY OptiMax™ Ultra Pure Cleaning Solution to clean optical components. DO
NOT use Window Cleaner on the reflector!
WARNING: Remove power from luminaire before this procedure.
Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step 2. Remove Wheel Stack Assembly. (Refer to
Step 3. Remove UV/IR Window Assembly as required. Refer to
Assembly"
Step 4. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, clean reflector.
DO NOT use window cleaner!
Step 5. Re-assemble luminaire.
0 2. 9 8 1 2. 0 0 05
on page 63.
Aft Cover
Reflector
Figure 3-9: Cleaning Reflector
M : R
AINTENANCE OUTINE
"Replacing the Wheel Stack"
"Replacing the UV/IR Window
UV/IR Window
Assembly
4-40 x 1/4" PPSS
Screw (4)
3
M
AINTENANCE
on page 47.)
37