Troubleshooting
Errors
The Status menus can be used to determine if any
luminaire mechanisms are reporting errors. The
Status panel at the Home screen will report overall
luminaire conditions as follows:
•
CALIBRATION (yellow)
•
OK (green)
•
ERROR (red)
•
LOCKED (white)
Pressing the Status panel will bring up the Status
screen (as shown at right). The Status screen will
indicate which specific mechanisms, if any, have
errors. It also provides a log of systems activity.
The Status panel operates as follows:
•
Mechanisms - displays mechanism status.
Mechanism names (sub-code abbreviations)
will be shown in yellow if calibrated, green if
okay, and red if an error exists. If an error
exists, press the Mechanisms panel to bring up
the Recalibration screen. Try recalibrating the
mechanism(s) that is reporting the error. If
calibration fails, refer to
Troubleshooting"
•
Log - displays system log. Use touchscreen
arrows to scroll up or down. Press CLR to
bring up Clear Log Yes/No options.
0 2. 9 8 1 2. 0 0 05
T
ESTING
"Component
on page 16.
& T
: T
ROUBLESHOOTING
ROUBLESHOOTING
Press STATUS to
bring up Status screen
Press MECHANISMS to
bring up Recalibrate screen
2
13