Replacing The Pan/Tilt Controller Pcb - PRG BAD Boy Field Service Manual

Replacing the Pan/Tilt Controller PCB

Parts:
24.9812.0765
Tools and Supplies:
#2 Philips screwdriver
WARNING: Remove power from luminaire before performing any maintenance procedures.
CAUTION: Always use anti-static precautions when working with PCBs.
To replace the Pan/Tilt Controller PCB:
Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step 2. At Tilt Yoke Leg, remove Yoke Cover.
Step 3. At Pan/Tilt Controller PCB, disconnect all cables.
Step 4. Remove Pan/Tilt Controller PCB by removing four 6-32 x 5/16" PPZ screws
Step 5. Replace Pan/Tilt Controller PCB by doing steps in reverse.
0 2. 9 8 1 2. 0 0 05
M
AINTENANCE
1 EA PCB ASSY, CONTROLLER PAN/TILT
Figure 3-35: Removing Pan/Tilt Controller PCB
: R R P
EMOVE AND EPLACE
Use anti-static precautions
CAUTION: when working with PC boards.
Pan/Tilt
Controller PCB
6-32 x 5/16"
PPZ Screw (4)
3
ROCEDURES
(Figure 3-35).
73