Routine Maintenance; Replacing The Lamp - PRG bad boy User Manual

Routine Maintenance

Replacing the Lamp

Parts:
71.2566.1200.0 1 EA LAMP, FASTFIT, PHILIPS MSR GOLD™
Tools:
Cotton gloves or finger cots
WARNING: Remove power from luminaire before performing any maintenance procedures.
CAUTION: Refer to
To replace lamp:
Step 1. Remove power from lamp and allow lamp to cool for at least 5 minutes.
Step 2. Remove power from luminaire.
Step 3. At rear of luminaire, rotate backcap counter-clockwise to remove (it will still be connected
by a tether). Refer to Figure 4-1 on next page.
Step 4. Remove existing lamp by rotating lamp base counter-clockwise and pulling straight out of
backcap.
Step 5. Install new lamp and rotate clockwise to secure in place.
Step 6. Replace backcap.
Step 7. Optimize lamp. Refer to
Step 8. Reset Lamp Hours. Refer to
0 2. 9 8 1 2. 0 0 01 A
T
ROUBLESHOOTING AND
"Proper Lamp Servicing and Operation" on page 46
"Adjusting the Lamp" on page
"Lamp Screen" on page
M : R
AINTENANCE OUTINE
before handling the lamp.
49.
25.
4
M
AINTENANCE
47