Cleaning The Head Filters - PRG bad boy User Manual

Cleaning the Head Filters

Tools and Supplies:
#2 Phillips screwdriver
Compressed air
To clean head filters:
WARNING: Remove power from luminaire before performing any maintenance procedures.
Step 1. Remove power from luminaire.
Step 2. At each mesh cover, remove two 6-32 x 1/2" PPZ screws (Figure 4-8).
Step 3. Remove sponge and filter.
Step 4. Clean sponge and filter with compressed air.
Step 5. Re-install components.
Step 6. Repeat for second sponge/filter.
0 2. 9 8 1 2. 0 0 01 A
T
ROUBLESHOOTING AND
Figure 4-8: Removing Head Filters
M : R
AINTENANCE OUTINE
Filter
4
M
AINTENANCE
Sponge
6-32 x 1/2"
PPZ Screw (2)
Mesh Cover
55