Conﬁguring Your Wireless Connection
The DG1670 ships with wireless LAN security set by default. See the security label
on your product (shown on image at the left) for the factory security settings: net-
work name (SSID), encryption method, network key, and WPS PIN.
You must set up your computer and other client devices to work
with the security settings on the DG1670. Refer to the documen-
tation for your client device for instructions on setting security.
On most computer systems you only need to select the network
name (SSID) device and enter the encryption key. If your com-
puter or client device supports WiFi Alliance WPS (Wireless Pro-
tected Setup), activate WPS on your computer or client device
and the DG1670 simultaneously to easily set up your system se-
If you need to modify the Data Gateway's default wireless security settings, or if you
want to conﬁgure any other wireless LAN settings, refer to the following instruc-
Accessing the Conﬁguration Interface
Follow these steps to access the conﬁguration interface. You should have already set
up the DG1670 as described in
a) If security has been properly set up on your computer to access the wire-
less LAN on the DG1670, use the connection utility for your operating sys-
tem to connect to the wireless LAN using its network name (SSID), as shown
on the security label.
b) If you cannot access the wireless LAN, you must ﬁrst establish a wired
Ethernet connection between your computer and the DG1670.
In your web browser, open the page http://192.168.0.1/ to access the
wireless router setup.
The Login screen displays.
Note: The default user name is "admin". The default password is "pass-
word", in lower case letters.
Enter the user name and password and click the Apply button to log in.
The System Basic Setup screen displays.
Touchstone DG1670 Data Gateway User's Guide
Installing and Connecting Your Data