General Description; Purpose Of Equipment; General Notes; Short Description - Becker AR6201 Installation And Operation Manual

Section 1.

GENERAL DESCRIPTION

1.1

Introduction

This manual describes the VHF transceiver AR6201-(X0X). The manuals DV
14300.03 I&O
("Maintenance and Repair") contain the following sections.
1 General
2 Installation
3 Operation
4 Theory of Operation
5 Maintenance and Repair
6 Illustrated Parts List
7 Modification and Changes
8 Circuit Diagrams
1.2

Purpose of Equipment

The AR6201-(X0X) VHF transceiver enables voice communication in the very
high frequency
selectable channel spacing of 25 kHz or 8.33 kHz.
The AR6201-(10X) VHF transceiver enables voice communication in the very
high frequency
selectable channel spacing of 25 kHz only.
1.3

General Notes

The word "frequency",
"channel name", as defined in EUROCAE, ED-23B: chapter 1.3.2.
The word "memory channel" or "channel" used in this document means a
memory place identified by a channel number. On that memory place, a
frequency may be stored for later use.
1.4

Short Description

The AR6201-(X0X) is a single block transceiver ideal to be fitted in all
type of general aviation aircraft and helicopters.
The VHF transceiver is a compact and lightweight single block unit. The
dimensions correspond to the standard instrument diameter of 58 mm (2 ¼
inch). Mounting is by means of four screws (back panel installation).
DV 14300.03/.04 Issue 5 5/2013
AR6201-(X0X)
("Installation and
Section
band between 118.000
band between 118.000
also used
Operation") and
DV 14300.03 DV 14300.04
I&O
X
X
X
N/A
N/A
N/A
N/A
N/A
MHz and 136.9916
MHz and 136.9750
in this document
DV 14300.04 M&R
M&R
X
X
X
X
X
X
X
X
MHz with a
MHz with a
in the sense of
Page 1-1