Frequency Indication; Audio Outputs; Mike Inputs; Af Auxiliary Input - Becker AR6201 Installation And Operation Manual

All controls and
equipment connectors and the antenna socket are located at the rear of
the unit. On the right-hand side is a Circuit Breaker located.

Frequency Indication

By means of a liquid crystal display (LCD) the frequency indication is
provided. The required operating frequency is set with the rotary knob.
The relation between the real operating frequency and the displayed
frequency is according to standards (ED-23B, chapter 1.3.2). For an
overview, refer to the table below.
Operating
Frequency (MHz)
118.0000
118.0000
118.0083
118.0166
118.0250
etc.
136.9750
136.9750
136.9833
136.9916

Audio Outputs

The transceiver includes two audio outputs: headphone and speaker. The
headphone rated output power is 300 mW into 150 Ohm. The rated output
power from the speaker output is 4 W into 4 Ohm.

Mike Inputs

The VHF transceiver has an input for dynamic microphone (DYN_MIKE) and
an input for standard microphone (STD_MIKE). Each input is able to
operate with single microphone or with 2 microphones of the same type
connected in parallel.

AF Auxiliary Input

The AF auxiliary input enables to connect an external audio source (NAV,
music-player ...) to the transceiver. The external audio is audible only
when the transceiver is in Receive Mode.
Page 1-2
AR6201-(X0X)
indicators are
Channel Spacing Displayed
(kHz) Frequency
in 8.33+25 kHz
Mixed Mode
25 118.000
8.33 118.005
8.33 118.010
8.33 118.015
25 118.025
etc. etc.
25 136.975
8.33 136.980
8.33 136.985
8.33 136.990
located on the
Displayed
Frequency
in 25 kHz Mode
118.00
N/A
N/A
N/A
118.02
etc.
136.97
N/A
N/A
N/A
DV 14300.03/.04 Issue 5 5/2013
front panel. The