Controls - Becker AR6201 Installation And Operation Manual

3.2.1

Controls

Description
1
IC/SQL
(Intercom/Sque
lch)
2
MDE
(Mode)
3
STO
(Store)
4 ↕/SCN
.
(Exchange/SCAN
)
5
Volume Knob
6
„ROTARY
ENCODER"
7
Display
When the user presses and holds down a key for at least 2 seconds, the
AR6201-(X0X) detects a "Long press" otherwise a "Short press" is
assumed.
The whole content of the AR6201-(X0X) display is inverted for a short
time, if any action is done by the user, e.g. pressing a key, and the
operation is not allowed at this time.
Beside the main functions, described in the table above, the controls
have additional functions. Description for these functions follow in the
chapters below.
DV 14300.03/.04 Issue 5 5/2013
AR6201-(X0X)
Main Function
A "Short press" during normal operation
toggles the
RX -SQL ON/OFF.
A "Long press" during normal operation
activates Intercom Menu.
A "Short press" during normal operation
changes to display page Frequency
Selection Mode.
"Long press" during normal operation
activates the Pilots Menu.
A "Short press" during normal operation
activates storage procedure.
A "Short press" during Standard Mode or
Scan Function exchanges Preset Frequency
and Active Frequency.
"Long press" activates Scan Function.
Turning the transceiver ON/OFF and
provide adjustment of the audio volume
level.
Turning the "ROTARY ENCODER" changes the
setting of several parameters
(frequency, IC-volume, VOX ...).
A push on the "ROTARY ENCODER" moves the
cursor to the next digit.
Page 3-3