Becker AR6201 Installation And Operation Manual page 69

of channel number selection can be left manually by consecutive short
press of the "ROTARY ENCODER", or leaves the Mode automatically after 5
s timeout.
In order to select the new channel number from LAST Channels Database
make a counter clockwise turn on the "ROTARY ENCODER". The Channel
Number is now inverted and the desired last used frequency, which is
related to one of the last nine channels, is selectable turning either
clockwise or counter clockwise the "ROTARY ENCODER". The mode of channel
number selection can be left manually by a consecutive short press of
the "ROTARY ENCODER", or leaves the Mode automatically after 5 s
timeout.
When leaving the LAST Channels Database and the last shown frequency is
not stored in one of the USER cannels Database, "CH--" will appear on
the display.
Accessing the "Last Channels Database" will be possible if "STORE LAST
CHANNEL" selected on MEMORY OPTIONS page in the Installation Setup,
otherwise the recently stored VHF frequencies are not available.
Note: If the device operates in the 25 kHz Mode a selection of an
earlier
Selection of 8.33 kHz channels, the device has to operate in
the 8.33/25 kHz Mixed Mode.
DV 14300.03/.04 Issue 5 5/2013
AR6201-(X0X)
stored 8.33 kHz channel is not possible. For
Page 3-9