Becker Avionics
3.2.5
Controls and Indications
3.2.5.1
User Interface
Symbol
Description
IC/SQL
(Intercom/Squelch)
1
MDE
(Mode)
2
STO
3
(Store)
↨/SCN
(Exchange/SCAN)
4
Power ON/OFF,
5
Volume Knob
Rotary encoder
6
Change of
-8/25-
Channel Spacing
7
Display
Active frequency
8
Preset frequency
9
DV17001.03 Issue 06 January 2019
Figure 15: GT6201, RCU62X1: Controls and Indications
Main Function
•
"Short push" during normal operation is used for the RX -SQL
ON/OFF.
"Long push" during normal operation starts the intercom menu.
•
•
"Short push" during normal operation changes to the frequency
selection mode.
"Long push" during normal operation starts the user menu.
•
"Short push" during normal operation starts the storage
•
procedure.
"Short push" during standard mode or scan mode changes
•
between preset and active frequency.
•
"Long push" starts the scan mode.
•
Turns the transceiver ON/OFF and is used to adjust the volume
level of received signals.
•
Turn the rotary encoder to change the selected parameters
(frequency, IC-volume, VOX, ...).
Push the rotary encoder to select the digits.
•
Push the rotary encoder to confirm the setting.
•
Push and hold the MOD and STO key at the same time for > 2 s
•
to change 8.33 to 25 kHz channel spacing and vice versa.
LCD: Liquid Crystal Display
Only on the active frequency:
Transmission is possible and the reception has priority, even in
•
scan mode.
•
Frequency tuning is not possible in standard mode.
•
Frequency tuning is possible in standard mode.
•
In scan mode both frequencies, active and preset are in listening
watch.
If no receive signal is detected on the active frequency, receiving
•
signals on the preset frequency will be audible, but will be muted
as soon as a signal on the active frequency is detected.
GT6201
Operating Instructions
Device Description
63