Basic Operations; Switch The Phone On/Off; Make A Call - UTStarcom F1000 Vonage Handbook

Basic Operations

2. BASIC OPERATIONS

2.1 Switch the Phone On/Off

Press and hold the power key
power-on/off animation.
If the PowerOn Code function is active, after switching on the phone,
enter the security code (with each input displayed as *) and press the left
soft key (Ok). If correct, the power-on animation will be displayed;
otherwise Code Error will be displayed.

2.2 Make a Call

Note: Prior to making or receiving calls, the phone must be
connected to a wireless Access Point (AP) and registered with the
Vonage network. See "WiFi-Settings" on page 55 for detailed
instructions.
1. Key in the phone number.
To delete the character or digit to the left of the cursor, press the right
soft key
numbers or characters, press and hold the right soft key
2. Press to call the number. "Connecting.." will be displayed.
To cancel the call attempt, press the right soft key
time display of 00:00:00 will appear. You can also press the
to cancel the call; the phone will return to standby mode.
3. When the call is connected, the call timer is displayed.
4. To end the call, press the right soft key
18
(Clear). To move the cursor, press
. The phone will display the
(Hangup) or the
. To delete all the
(Clear).
(Cancel); a
key
key.