Ring Tone; Browse; Speed Dial - UTStarcom F1000 Vonage Handbook

Phonebook (Names)

3.4.1 Ring Tone

Select this option to specify a ring tone for the particular group category.
Press to highlight and sample the ring tone options. Then press the
left soft key
Note: The Blacklist only has a Browse function because the
phone will automatically reject any call from this group. Thus, it is
not necessary to set a ring tone for the Blacklist group.

3.4.2 Browse

When you access this option, the list of entries in the selected group
category will be displayed.
Enter the first letter(s)/digit(s) of the desired entry (name). Press
highlight the entry, and press the left soft key
details for the entry. Press the left soft key
or Delete Entry to edit or delete this entry.

3.5 Speed Dial

Speed Dial
Select this option to assign a phone number in the phonebook to one of
the speed dial ke ys
(refer to "Use Speed Dial" on page 19).
After you access this option, the setting status for key #1 (
displayed. Press
If no phone number is assigned to the key, Unset will be displayed.
Press the left soft key
displayed (if there are no entries in the phonebook, No Record will be
displayed). Enter the first letter(s)/digit(s) of the desired entry (name).
32
(Ok) to complete your selection.
-
to browse through the speed dial key settings.
(Option), and select Edit
for greater convenience when dialing
(Set); the phonebook entry list will be
(Details) to view the
) will be
to