Settings; Scheme - UTStarcom F1000 Vonage Handbook

Menu -> Settings

4.3 Settings

Settings
From this submenu, you can perform various phone settings:

4.3.1 Scheme

Settings Scheme
When this option is highlighted, the current setting will be displayed in the
adjacent bubble. After accessing this option, you can select from the
following options:
4.3.1.1 Static Picture
The standby display will become static after you set this option.
After this option is selected, its current setting will be highlighted. To
customize a text and display it in standby mode, select User-defined; to
select and display a picture in standby mode, select from the options
Photograph1-Photograph24.
If User-defined is selected, enter up to 12 letters (refer to "Input
Method" on page 68), and then press the left soft key
complete the operation
If one of the options Photograph1-Photograph24 is selected, the
corresponding picture will be displayed. You can press
through other pictures. When the desired picture is displayed, press
the left soft key
4.3.1.2 Every Hour
The standby display will change every hour in a 24-hour cycle after you
set this option. When this option is accessed, these options will be
available:
42
(Ok) to complete the operation
(Ok) to
to browse