Wifi Config - UTStarcom F1000 Vonage Handbook

Menu -> WiFi-Settings

4.5.2 WiFi Config

WiFi-Settings WiFi Config
From this option, you can perform the following WiFi configuration:
4.5.2.1 AP Profile
WiFi-Settings WiFi Config AP Profile
This option enables you to set up to four AP (Access Point) profiles. Each
time you switch on the phone, the phone will try to connect to one of these
APs according to their respective profile settings.
After you select this option, the AP profile list will be displayed. If the
security mode of an AP profile is set to WEP Key, the
displayed in front of the AP profile. If the security mode is set to WPA-PSK,
the icon will be displayed in front of the AP profile. If the security mode
is set to Open AP, no icon will be displayed in front of the AP profile.
Press to highlight the desired AP profile, and then press the left soft
key (Ok). The following options will be available:
SSID
This option enables you to save an AP's SSID to the AP profile.
After accessing this option, enter the SSID (32 alphanumeric characters
maximum), and then press the left soft key
operation.
Security Mode
This option enables you to set the security mode for the AP profile.
After accessing this option, select Open AP, WEP Key or WPA-PSK:
If WEP Key is selected, the phone will then display the options of WEP
Key Info (refer to "WEP Key Info")
56
icon will be
(Ok) to complete the