Current Profile Shortcut; Vibration Shortcut; Keypad Lock - UTStarcom F1000 Vonage Handbook

You can also access an option by pressing its corresponding number
key.

2.10 Current Profile Shortcut

In standby mode, press
Press to highlight the desired option, and then press the left soft key
(Ok) to access the option.
For details of profile setup, refer to "Profiles" on page 39.

2.11 Vibration Shortcut

In standby mode, press and hold
calls and alarms to vibration, and set the keypad tone and alert tone to
"Off". will be displayed.
Press and hold
tone in the current profile. The indicator corresponding to the current
profile's ring mode will be displayed. (Refer to "Display Indicators" on
page 12)
For detailed operations, refer to "Ring Mode" on page 40.

2.12 Keypad Lock

The keypad lock prevents the keys from being accidentally pressed,
resulting in unintentional operations.
In standby mode, press and hold
will be displayed. To unlock the keypad, press and hold
standby mode.
When the keypad is locked, you can answer a call as usual. During the
call, you can operate the phone normally. However, the keypad will
automatically lock when the call ends, or if the call is rejected.
When the keypad is locked, even if the backlight is not set to Off, the LCD
screen and keypad will not light when keys are pressed.
to access the menu of the current profile.
again to resume ring mode, keypad tone and alert
to set the ring mode for incoming
to lock the keypad. The
Basic Operations
indicator
again in
27