Basic Operations; Turning The Phone On And Off; Turning The Phone On; Turning The Phone Off - UTStarcom UTS 702 U User Manual

Basic Operation

Basic Operations

2.

2.1 Turning the Phone On and Off

2.1.1 Turning the Phone ON

2.1.2 Turning the Phone Off

2.2 Making Calls

Before dialing a telephone number, make sure the signal strength is
sufficient. The signal strength icon on the LCD of the phone should be at
least .
1. Press and hold (minimum of two seconds) until the LCD
backlight turns on.
The phone is locked when "Enter Code:" is displayed on the
LCD screen. When "Enter Code:" is displayed enter the six-
digit (0-6) password and press the left soft key
unlock the phone. If the correct password has been entered, the
selected greeting will be displayed on the LCD screen and the
phone will enter standby mode.
The default six-digit password is 8-8-8-8-8-8.
When the battery power is too low, a warning tone is heard and
the phone switches itself off.
Press and hold until the LCD is cleared of all texts and
icons.
The phone keypad is locked if
When the icon is displayed, press
keypad.
2
icon is displayed on the screen.
to unlock the phone
(Ok) to