Basic Operations; Switch The Phone On/Off; Make A Call - UTStarcom Vonage F1000 series Handbook

Basic Operations

2. BASIC OPERATIONS

2.1 Switch the Phone On/Off

Press and hold the power key
on/off animation.
If the PowerOn Code function is active, after switching on the phone,
enter the security code (with each input displayed as *) and press the left
soft key (Ok). If correct, the power-on animation will be displayed;
otherwise Code Error will be displayed.

2.2 Make a Call


Note: Prior to making or receiving calls, the phone must be
connected to a wireless Access Point (AP) and registered with the
Vonage network. See "WiFi-Settings"
detailed instructions.
1. Key in the phone number.
To delete the character or digit to the left of the cursor, press the right
soft key
the numbers or characters, press and hold the right soft
key (Clear).
2. Press to call the number. "Connecting..." will be displayed.
To cancel the call attempt, press the right soft key
time display of 00:00:00 will appear. You can also press the
key to cancel the call; the phone will return to standby mode.
3. When the call is connected, the call timer is displayed.
4. To end the call, press the right soft key
18
(Clear). To move the cursor, press
. The phone will display the power-
(Hang up) or the
on page 56
. To delete all
(Cancel); a
for
key.