Basic Operations; Switch The Phone On/Off; Make A Call - UTStarcom UT611 User Manual

2. BASIC OPERATIONS

2.1 Switch the Phone On/Off

Press and hold the power key
power-on/off animation and sound the power-on/off music (if the Keypad
volume is not mute)
If the Phone lock function is active, after switching on the phone, it will
remind you to input the security code. Enter the security code and press
the left soft key
and the PIN Code protection is on, input the correct PIN code, then the
phone is turned to standby mode. (Refer to page 59 Pin Setting).
The phone needs time to read the PIM card information. If the PIM card is
inserted to the phone, please wait for a while after switching on the phone.
Then the phone's mode is turned to standby.

2.2 Make a Call

1. Key in the phone number.
If one inputs the wrong number, press
input number. Or press and hold the right soft key
clear all the input numbers. Then the phone is in standby mode.
2. Press
Press the right soft key
display of 00:00:00 will appear.
3. When the call is connected, the calling timer is displayed.
4. To end the call, press the right soft key
key, or close the flip cover. The corresponding call duration will be
displayed after disconnecting the call.
(Ok). If the PIM card has been inserted in the phone,
to call the number. "Connecting..." will be displayed.
. The phone will display the
(Clear) to cancel the call attempt. A time
Basic Operations
(Clear) to clear the last
(Clear) to
(Hang up) or the
17