Set Security - UTStarcom F1000 Vonage Handbook

4.3.5.4 On/Off Animation
Settings Display On/Off Animation
This option enables you to select the power-on/off animation. When this
option is highlighted, its current setting will be displayed in the adjacent
bubble.
Select one of the options Animation 1 - Animation 4; the corresponding
animation will be displayed. Press the left soft key
the operation.

4.3.6 Set Security

Settings Set Security
This password protected option enables you to set the security level to
protect your phone from unauthorized use.
After accessing this option, you will be prompted to enter the user
definable security code (i.e. password). Key in the security code and
press the left soft key
available (otherwise Code Error will be displayed):
Note: The initial default security code is "888888".
4.3.6.1 PowerOn Code
If this function is active, the security code will need to be entered each
time you switch on the phone. When this option is highlighted, its current
setting will be displayed in the adjacent bubble.
After accessing this option, select On or Off to activate or deactivate.
4.3.6.2 Change Code
Select this option to change the security code. Observe the following
steps:
(Ok). If correct, the following options will be
Menu -> Settings
(Ok) to complete
47