Information On J Terminal - JVC HR-S9700EU Instructions Manual

Information On
J Terminal
J terminal
J Terminal [JLIP (Joint Level Interface
Protocol) Connector]
The J terminal is used to connect the recorder to a personal
computer or similar device to allow computerized control of the
recorder during editing and certain other operations.
Examples:
With the optional JLIP VIDEO CAPTURE BOX GV-CB3E:
Enables Random Assemble Editing of up to 99 segments, using
this recorder as the source player.
Allows you to capture still images from the recorder into a
personal computer.
For further details consult your nearest JVC dealer.
JLIP ID Number
Your recorder has its own JLIP ID number. This ID number must
be unique when your recorder is connected to another device
via its J terminal. The ID number is preset to "1" at the factory.
You can change this number to any number between "1" and
"99". If it is necessary to change the JLIP ID number, perform the
following steps.
A
Access the Main Menu screen.
Press MENU.
B
Access the Initial Set screen.
rt
Press to move the highlight bar (pointer) to "INITIAL
e
SET", then press OK or
C
Access the JLIP ID No. Set screen.
rt
Press to move the
highlight bar (pointer) to
"JLIP ID NO. SET", then press
e
OK or .
D
Set the JLIP ID number.
Press the number keys to
enter the desired ID number,
then press OK.
E
Return to the normal screen.
Press MENU.
EN
.
63