Timer Warning - JVC HR-S9600EU Instructions Manual

PUSH-OPEN
STANDBY/ON
REC LINK
‰TIMER indicator
1
2
1 2
4 5
7 8
VPS/PDC
0
1
PROG
2
STOP+/–
Satellite Tuner Users
To timer-record a satellite broadcast using S
1 Set "AV2 SELECT" to "AV2" (
2 Perform steps 1 – 7.
3 Set the satellite tuner to the appropriate channel before
the selected programme begins.
4 Leave the satellite tuner's power on.
ATTENTION
Regarding Guide Program Number Set
"GUIDE PROG SET" appears after performing step 3 if the
Guide Program number for the S
entered has not been set.
Press the NUMBER keys or %fi to input the channel
position number on which your recorder receives that
station, then press OK or
number. The S V program screen appears.
HOW IEW
GUIDE PROG SET
GUIDE PROG TV PROG
2 – –
[5 ∞ ] =
[PROG] : EXIT
REC LINK
DIGITAL TBC / NR TIMER
– –:– –
3
6
WEEKLY
9
3
4
4
3
OK
V :
HOW IEW
pg. 44).
V number you
HOW IEW
#
to set the Guide Program
(Ex.) To timer-record a ZDF
programme with S V
HOW IEW
* If your recorder receives
ZDF on the channel
position 2, press OK or
after entering "2".
SET TAPE SPEED
4
Press SP/LP (
DIGITAL
TBC / NR TIMER
SET VPS/PDC MODE
5
Press VPS/PDC to select "ON" or "OFF".
If "VPS/PDC ON" is displayed on the screen or "VPS/
PDC" is lit on the display panel, VPS/PDC is set to ON.
If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
is not lit on the display panel, VPS/PDC is set to OFF.
"VPS/PDC Recording" on page 31.
RETURN TO NORMAL SCREEN
6
Press PROG or OK. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
appears.
Repeat steps 1 – 6 for each additional programme.
ENGAGE RECORDER'S TIMER MODE
7
Press ‰ (or ‰TIMER). The recorder turns off automati-
cally and ‰ appears on the display panel. The ‰TIMER
indicator on the recorder also lights up.
To disengage the timer, press ‰ (or ‰TIMER) again.
NOTES:
To Change The Stop Time . . .
. . . press STOP +/– in step 3. You can compensate for
anticipated programme schedule delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . in step 3, press WEEKLY (NUMBER key "9") for weekly
serials or DAILY (NUMBER key "8") for daily serials (Monday
– Friday). Either "WEEKLY" or "DAILY" appears on the screen.
Pressing the button again makes the corresponding indication
disappear.
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL" appears
on the front display panel. To record the extra programme, you
must first cancel any unnecessary programmes (
It is not possible to timer-record a TV programme with a
S V number which starts with "0".
HOW IEW

Timer Warning

If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning
appears on screen to tell you
that the recording is to start in
5 minutes.
NOTES:
The warning only appears if
you're not in the Timer mode at that time.
If this recorder is being used as the player for tape
dubbing, the warning screen is recorded on the tape in
the other video recorder.
.
The warning blinks for the entire 5 minutes leading up to
the start of timer recording. To clear the display, press
#
EN
) to set the tape speed.
pg. 32).
– WARNING–
TIMER RECORDING
TO START SOON
[ ]
29
.